为什么无法升级华为的S2016?
为什么无法升级S2016?
无法升级华为的S2016的VRP,
新版本为Quidway S2008-S2016-VRP3.10-0010,是什么原因呢?为什么会文件太多,升级文件是从华为3COM上下载下来的
升级过程如下:
******************************************
* *
* Quidway 2016 BOOTROM, Version 1.0 *
* *
******************************************
Copyright(C) 2000-2002 by HUAWEI TECHNOLOGIES CO.,LTD.
Creation Date : Mar 20 2002, 18:23:58
CPU Type : ARM7
CPU Clock Speed : 50Mhz
Memory Size : 32MB
Please check port leds....................
Initialize LS44LTSU ......................OK!
SDRAM selftest............................OK!
FLASH selftest............................OK!
Interrupt selftest........................OK!
SD551 selftest............................OK!
CPLD selftest.............................OK!
Port 19 has no module
PHY selftest..............................OK!
Press Ctrl-B to enter Boot Menu... 3
Password :
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from Flash
5. Modify bootrom password
6. Set switch HGMP mode
0. Reboot
Enter your choice(0-6):
Please set bootrom download protocol parameter:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3): 3
Please select your download baudrate:
1. 9600
2. 19200
3. 38400
4. 57600
5.*115200
0. Return
Enter your choice(0-5): 5
Are you sure to update your bootrom? Yes or No(Y/N)y
Download baudrate is 115200 bps. Please change the terminal's baudrate to 115200
bps, and select XMODEM protocol.
Press enter key when ready.
Now please start transfer file use XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading.............failed!
The file is too large to load it!
Please change the terminal's baudrate back to 9600 bps.
Press enter key when ready.
[ Last edited by 无悠 on 2004-6-24 at 09:30 ]
