发新话题
打印

[求助] : [故障] 有谁帮我看一下接口信息

: [故障] 有谁帮我看一下接口信息

有谁帮我看一下接口信息

[Quidway]dis int e0/0
Ethernet0/0 current state :UP
Line protocol current state :UP
Description : Ethernet0/0 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is *.*.*.*/29
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc3a-d433
Media type is twisted pair, loopback not set, promiscuous mode not set
100Mb/s, Full-duplex,  link type is autonegotiation
Output flow-control is disabled, input flow-control is disabled
Output queue : (Urgent queuing : Size/Length/Discards)  0/50/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards)  0/75/4321
Last clearing of counters: Never
    Last 300 seconds input rate 1191879.75 bytes/sec, 9535038 bits/sec, 1637.53
packets/sec
    Last 300 seconds output rate 873221.25 bytes/sec, 6985770 bits/sec, 1923.95
packets/sec
    Input: 86442239 packets, 2061025151 bytes, 86442239 buffers
           8021 broadcasts, 1155629 multicasts, 0 pauses
           0 errors, 0 runts, 0 giants
           0 crc, 0 align errors, 0 overruns
           0 dribbles, 0 drops, 0 no buffers
    Output:108649004 packets, 887850046 bytes, 108649005 buffers
           53 broadcasts, 0 multicasts, 0 pauses
           0 errors, 0 underruns, 0 collisions
           0 deferred, 0 lost carriers

这应该是有问题的吧

TOP

没有人帮我顶一下吗?

TOP

发新话题